Share:  

Sharang Corporation





Home

Profile

What We Offer

Media Gallery

Contact Us

Enquiry

Home » What We Offer » PCB Assembly Equipments


PCB Assembly Equipments

We are engaged in supplying a wide range of PCB Assembly Equipments/Conveyors that is fabricated using high grade raw material, procured from quality conscious vendors. These are widely acclaimed for easy adjustment, Low maintenance and high operational efficiency. We offer the following products under this:
Wave Soldering Machine

Wave Soldering Machine

We supply a qualitative range of wave soldering machines, that is procured from some of the reliable manufacturers of the clients. Our range is in strict compliance with the set industrial standards and known for their easy adjustment, low maintenance and high operational efficiency. Available in different specifications, these are offered by us at most competitive prices.



Wave Soldering Machine WSM 300 / Wave Soldering Machine Table Top - Model WSM 200


General

• All Control Components of CE Markings.
• Power Efficient Design.
• Independent Controllers for easy maintenance.
• Non-standard Bath Sizes available on request.
• Option of Single or Dual Wave.

Solder Bath

• High Grade Stainless Steel Solder Pot
• Solder Pump Driven by AC Drive
• Wave Height Controller through AC 3 Phase Motor
• PID Controller for accurate temperature control
• Interval Sensor With Digital Timer

Pre- Heater

• Effective & efficient Pre-Heaters
• Ceramic Glass Top
• PID Controller for temperature control

Foam Fluxer With Air Knife

• High Grade Stainless Steel Construction
• Special Plastic Foaming Tube
• Interval Sensor With Digital Timer
• Fitted With Air Filter , Regulator , Indicator
• External air Supply required
• Flow Control Valve for fine Control
• Optional Flux Density Controller

Conveyor

• Chain type conveyor
• High Grade aluminum profile
• Step-less angle adjustment
• Driven by AC 3 Phase Motor
• Speed Control through AC Drive

  WSM 200 (Single Wave) WSM 300 S (Single Wave) WSM 300 D (Dual Wave)
General Power Supply 220 V AC, 50 Hz, 1 Ph., 20 Amp 440 V AC, 50 Hz, 3 Ph., 27 Amp 440 V AC, 50 Hz, 3 Ph., 42 Amp
Dimensions in mm (incl Conv. Size) L-2900 W-850 H-1100 L-3500 W-900 H-1800 L-3500 W-900 H-1800
Weight (without solder) 180 Kg. 320 Kg. 380 Kg.
Construction Table Top Model Floor Model Floor Model
Solder Bath Wave Width 200mm 300mm 300mm
Solder Bath Cap 110 Kg 140 Kg 140 Kg x 2 = 280 Kg
Max Wave Hight 0-15 mm 0-15 mm 0-15 mm
Warm Up Time (Aprox) 60 min 70 min 70 min
Solder Bath Power 2.4 KW 3.0 KW 3.0 x 2 = 6.0 KW
Flux Tank Flux Capacity 3 Ltrs 4 Ltrs 4 Ltrs
Air Consumption 35 cfm at 30 psi 40 cfm at 30 psi 40 cfm at 30 psi
Conveyor Conveyor Speed 0-2.5 M/min 0-2.5 M/min 0-2.5 M/min
Conveyor Angle 5, 6, 7 degree, stepless 4-5 degree, stepless 4-5 degree, stepless
Pre- Heater Pre Heater Length 800 mm 900 mm 900 mm
Pre Heater Power 2.0 KW 3.0 KW 3.0 KW
Dip Soldering Machine

Dip Soldering Machine

Automatic Dip Soldering Machine - Model DIP 905

The PCB is lowered into the bath through motorized movement till the solder side of the PCB touches the solder. The movement stops at this point. It stops there to the pre-set time on the timer, to enable the dwell time. After the set time the movement resumes with the controlled cam movement, to effect a perfect peel back, and brings the PCB back to the home position.

  • Low cost substitute to attain high quality PCB soldering
  • Suitable for single / double / multilayered PCB¿S
  • Digital temperature controller for Solder Bath
  • Controlled motorized movement of PCB into the solder bath
  • Electronic Timer for setting dwell time (solder time)
  • Easy mechanical adjustments for depth setting
  • Rugged & reliable construction

Bath Size 14" x 14" 18' x 14'
Solder Capacity 35 Kg 45 Kg
Power Supply 220 V AC, 50HZ 220 V Ac, 50Hz
Heater Power 3.2 KW 4.0 KW
Heat up Time 35 min 35 min
Bath Depth 50mm 50mm
Dimensions 690 x 460 x 360mm 790 x 460 x 360 mm
Weight (without Solder) 45 Kg 50 Kg
Standard Accessories PCB Carrier-1 no PCB Carrier-1 no
Scrapped 1 no Scrapper 1 no
L/N Key Kit-1 no L/N Key Kit-1 no

Foam Fluxer with Pre-Heater - Model FFP 915

For fluxing and pre-heating the PCB before Dip Soldering. The foam fluxer applies a uniform layer to the PCB through a foaming tube. The air knife smoothens up the flux, and removes the excess flux. The pre-heater activates the flux, and prepares the assembly for soldering.

  • Carrier supplied compatible with Model DIP 905
  • Foam fluxer with plastic foaming tube
  • Digital temperature controller for pre-heater.
  • Independent flow control valve for air knife and fluxer
  • One touch pneumatic fittings for external air supply.
  • Manual carrier movement on conveyor rais

General Dimensions in mm L-775 W-525 H-375
Weight 20Kg
Flux Bath & Air Knife Flux Bath Capacity 4.0 Ltrs
Foam Width 14"
Foam Height 10 mm
Air Consumption 40 cfm at 30psi
Pre-Heater Power Supply 220 V AC, 50 Hz, 1.6 KW
Standard Accessories PCB Carrier 1 No
Utilities Power Connection 15 Amp Power Point
Air Supply Compressed Air with FR
Component Forming Machines

Component Forming Machines

Our wide range of forming machines for axial & radial components is available in standard options. These are procured from leading manufacturers who fabricate these by using qualitative raw material that provides it with distinct features such as sturdy construction and high productivity rate. These are available in various models such as:

Manual Cut & bend machine for axial model MAP 860 / Automatic model UAP 850

Manual De-Taping Machine for Radials Model MAP 860 R / Automatic Model UAP 850 R
The model is widely acclaimed for its peak performance and durability. Some of its distinct features are:

• Suitable for Tape Components
• Strain Free Forming
• Optional Vertical Configuration attachment

Technical Specification

 Dimension (l x w x h)  330 x 160 x 175 mm
 Weight  10 kg
 Power  220V AC, 50Hz, 100W


Automatic Cut & Kink Machine For Radials Model ARP 750

The model has gained huge appreciation for its high operational efficiency and easy installation. Some of its features are:

• Suitable for loose Components
• Option of Cut & Kink OR plain Cut Operation
• Kink Depth adjustable to snap-in or stand-off
• Leg length adjustable
• Manual Component feeding and motorized forming
• Option of auto mode for 1 sec stroke cycle or jog mode for foot switch operation

Jumper Link Making Machine Model JMP 680

The high performing Jumper Link Making Machine Model JMP 680 is known for its sturdy construction and high scuff resistivity. Some of its distinct features are:

• Automatic operation
• Step-less adjustment of pitch
• Easy adjustment & maintenance

Universal Manual Preformer Model UMP 870

• Manual operation
• Versatile machine with variety of tooling options
• Suitable for loose axial and radial components.
• Easy adjustments.
• Hardened steel toolings
• Ideal for low to medium volume production
Automatic Wire Sizing Machine

Automatic Wire Sizing Machine

Avail from us an assortment of automatic wire sizing machines that find wide application in electronics & electrical industry. These machines are suitable for cut to length applications and can be used for round and flat cables sleeves, shrink tubing etc. Available in different specifications, these are appreciated for their efficient operations and low maintenance standards.



Automatic Wire Sizing Machine - Model AWS 540


• Suitable for cut to length applications.
• Ideal for round and flat cables sleeves, shrink tubing etc.
• Operational feed guides for flat cables.
• Wire fed through guides and feed rollers
• Length measurement through closed loop circuit with encoder feed back.
• Special grade tool steel cutting blades.
• Wire spool holder and de-reeler for drag free to the machine.
• Capability of feeding three wires at a time to increase output.

Dimension(lxwxh) 420x320x360 mm
Weight 24 Kg
Power 220V AC, 50Hz, 100W
Wire Diameter 1.0 mm to 3.5 mm
Length Setting Min 10mm Max 9999mm
Time(T) for cutting length (L mm) T=)L/132+1) Sec
Output per hour for length L 3600/T
Cutting Tolerance +/- 2.0 mm.
Wire Stripping Cum Twisting Machine

Wire Stripping Cum Twisting Machine

We offer a range of wire stripping cum twisting machines that is used for stripping the insulation of round cables and twisting the stands of multi strand wires simultaneously. Procured from reputed vendors, these machines are high in performance and requires low maintenance. Further, we also make sure that these machines are in adherence with the relevant industrial norms.



Wire Stripping Cum Twisting Machine - Model AWZ 460


• For stripping the insulation of round cables and twisting the stands (of multi strand wires), simultaneously.
• Inserting the wire in the collet and withdrawing it completes the operation.
• Simple and fast change over from one wire diameter to another is done by changing the collet according to the wire diameter.
• Easy adjustments of stripping length.
• Nick free stripping as the tool does not touch the conductor.
• Special grade tool steel blade.

High quality motor, rated for continues & uninterrupted operation.

Dimension (lxwxh) 250x130x180mm
Weight 4.0 Kg
Power 220V AC, 50Hz, 50W
Wire Diameter 1.2mm to 3.5mm
Stripping Length 3.0mm to 25.0mm
Collet Size available From 1.4 to 6.0mm in steps of 0.1mm
Standard Accessories Collets : 4 no
Spare Spring : 5 no
Spare Tool Bit : 1 no
Tool Kit.
IC Lead Straightener

IC Lead Straightener

We Offer quality IC lead straightener which is valued by our clients due various important features as:

• Table top tool for straightening DIP, IC leads.
• Manual operation
• Straightened leads speeds up insertion rates.
• Provision of ESD grounding for sensitive components.
• Maintainance free operation.
• Suitable for loose axial and radial components.
• Easy adjustments.
• Hardened steel tooling
• Ideal for low to medium volume production..

Model Spacing
EC 31 0.300" (07.62mm)
EC 32 0.400" (10.06mm)
EC33 0.600" (15.24mm)
EC34 (19.05mm)
Conveyors

Conveyors

The most versatile type of powered conveyor, suitable to be built in a variety of configuration, to convey a wide variety of regular & irregular shaped products from light to medium loads.

Accessories

• Working platforms/tables.
• Tube Light Fittings.
• Instrument Racks. Instruction Sheet holder
• Foot Rests, Bin Supports, etc.

Features

• Modular design for fast and convenient assembly
• Specially designed aluminum profile for track and ground supports
• Range of Belt type for different applications
• Available in a variety of configurations

Application Areas

• Electronic Products Assembly
• Wiring Harness
• Food Processing
• Packaging & Warehousing
• Auto component assembly








Contact us

Mr. Ramesh Borekar (Partner)
Off. No. 106, Laxmi Plaza, 1st Floor, Opposite Alfa Laval, Pune Bombay Road, Kasarwadi
Pune, Maharashtra - 411 012, India
Telephone:  +(91)-(20)-32417448



Home  |  Profile  |  What We Offer  |   Media Gallery  |  Site Map  |  Contact Us  |  Enquiry

Member IndiaMART.com © Sharang Corporation, All Rights Reserved. (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Business Enquiry Form


Add More Products / Services

(* represents compulsory fields )

*Describe Your Requirements in Detail
Please Fill Your Contact Information
*Contact Person:
*Email:
Company:
Street Address:
*Country:
*Telephone:
Mobile:
Website:
*Enter the code:

Send me a copy of this enquiry