|
View Enquiry Basket
PCB Assembly Equipments/Conveyors
| We are engaged in supplying a wide range of PCB Assembly Equipments/Conveyors that is fabricated using high grade raw material, procured from quality conscious vendors. These are widely acclaimed for easy adjustment, Low maintenance and high operational efficiency. We offer the following products under this: |
 
 |
Wave Soldering Machine We supply a qualitative range of wave soldering machines, that is procured from some of the reliable manufacturers of the clients. Our range is in strict compliance with the set industrial standards and known for their easy adjustment, low maintenance and high operational efficiency. Available in different specifications, these are offered by us at most competitive prices.
Wave Soldering Machine WSM 300 / Wave Soldering Machine Table Top - Model WSM 200
General
• All Control Components of CE Markings.
• Power Efficient Design.
• Independent Controllers for easy maintenance.
• Non-standard Bath Sizes available on request.
• Option of Single or Dual Wave.
Solder Bath
• High Grade Stainless Steel Solder Pot
• Solder Pump Driven by AC Drive
• Wave Height Controller through AC 3 Phase Motor
• PID Controller for accurate temperature control
• Interval Sensor With Digital Timer
Pre- Heater
• Effective & efficient Pre-Heaters
• Ceramic Glass Top
• PID Controller for temperature control
Foam Fluxer With Air Knife
• High Grade Stainless Steel Construction
• Special Plastic Foaming Tube
• Interval Sensor With Digital Timer
• Fitted With Air Filter , Regulator , Indicator
• External air Supply required
• Flow Control Valve for fine Control
• Optional Flux Density Controller
Conveyor
• Chain type conveyor
• High Grade aluminum profile
• Step-less angle adjustment
• Driven by AC 3 Phase Motor
• Speed Control through AC Drive
| | WSM 200 (Single Wave) | WSM 300 S (Single Wave) | WSM 300 D (Dual Wave) | | General | Power Supply | 220 V AC, 50 Hz, 1 Ph., 20 Amp | 440 V AC, 50 Hz, 3 Ph., 27 Amp | 440 V AC, 50 Hz, 3 Ph., 42 Amp | | Dimensions in mm (incl Conv. Size) | L-2900 W-850 H-1100 | L-3500 W-900 H-1800 | L-3500 W-900 H-1800 | | Weight (without solder) | 180 Kg. | 320 Kg. | 380 Kg. | | Construction | Table Top Model | Floor Model | Floor Model | | Solder Bath | Wave Width | 200mm | 300mm | 300mm | | Solder Bath Cap | 110 Kg | 140 Kg | 140 Kg x 2 = 280 Kg | | Max Wave Hight | 0-15 mm | 0-15 mm | 0-15 mm | | Warm Up Time (Aprox) | 60 min | 70 min | 70 min | | Solder Bath Power | 2.4 KW | 3.0 KW | 3.0 x 2 = 6.0 KW | | Flux Tank | Flux Capacity | 3 Ltrs | 4 Ltrs | 4 Ltrs | | Air Consumption | 35 cfm at 30 psi | 40 cfm at 30 psi | 40 cfm at 30 psi | | Conveyor | Conveyor Speed | 0-2.5 M/min | 0-2.5 M/min | 0-2.5 M/min | | Conveyor Angle | 5, 6, 7 degree, stepless | 4-5 degree, stepless | 4-5 degree, stepless | | Pre- Heater | Pre Heater Length | 800 mm | 900 mm | 900 mm | | Pre Heater Power | 2.0 KW | 3.0 KW | 3.0 KW | |
Add to Enquiry Basket  
|
Powered Conveyors The most versatile type of powered conveyor, suitable to be built in a variety of configuration, to convey a wide variety of regular & irregular shaped products from light to medium loads.
Accessories
• Working platforms/tables.
• Tube Light Fittings.
• Instrument Racks. Instruction Sheet holder
• Foot Rests, Bin Supports, etc.
Features
• Modular design for fast and convenient assembly
• Specially designed aluminum profile for track and ground supports
• Range of Belt type for different applications
• Available in a variety of configurations
Application Areas
• Electronic Products Assembly
• Wiring Harness
• Food Processing
• Packaging & Warehousing
• Auto component assembly |
Add to Enquiry Basket
|
IC Lead Straightener We Offer quality IC Lead Straightener which is valued by our clients due various important features as:
• Table top tool for straightening DIP, IC leads.
• Manual operation
• Straightened leads speeds up insertion rates.
• Provision of ESD grounding for sensitive components.
• Maintainance free operation.
• Suitable for loose axial and radial components.
• Easy adjustments.
• Hardened steel tooling
• Ideal for low to medium volume production..
| Model | Spacing | | EC 31 | 0.300" (07.62mm) | | EC 32 | 0.400" (10.06mm) | | EC33 | 0.600" (15.24mm) | | EC34 | (19.05mm) | |
Add to Enquiry Basket
|
Dip Soldering Machine/Foam fluxer Automatic Dip Soldering Machine - Model DIP 905
The PCB is lowered into the bath through motorized movement till the solder side of the PCB touches the solder. The movement stops at this point. It stops there to the pre-set time on the timer, to enable the dwell time. After the set time the movement resumes with the controlled cam movement, to effect a perfect peel back, and brings the PCB back to the home position.
- Low cost substitute to attain high quality PCB soldering
- Suitable for single / double / multilayered PCB¿S
- Digital temperature controller for Solder Bath
- Controlled motorized movement of PCB into the solder bath
- Electronic Timer for setting dwell time (solder time)
- Easy mechanical adjustments for depth setting
- Rugged & reliable construction
| Bath Size | 14" x 14" | 18' x 14' | | Solder Capacity | 35 Kg | 45 Kg | | Power Supply | 220 V AC, 50HZ | 220 V Ac, 50Hz | | Heater Power | 3.2 KW | 4.0 KW | | Heat up Time | 35 min | 35 min | | Bath Depth | 50mm | 50mm | | Dimensions | 690 x 460 x 360mm | 790 x 460 x 360 mm | | Weight (without Solder) | 45 Kg | 50 Kg | | Standard Accessories | PCB Carrier-1 no | PCB Carrier-1 no | | Scrapped 1 no | Scrapper 1 no | | L/N Key Kit-1 no | L/N Key Kit-1 no |
Foam Fluxer with Pre-Heater - Model FFP 915
For fluxing and pre-heating the PCB before Dip Soldering. The foam fluxer applies a uniform layer to the PCB through a foaming tube. The air knife smoothens up the flux, and removes the excess flux. The pre-heater activates the flux, and prepares the assembly for soldering.
- Carrier supplied compatible with Model DIP 905
- Foam fluxer with plastic foaming tube
- Digital temperature controller for pre-heater.
- Independent flow control valve for air knife and fluxer
- One touch pneumatic fittings for external air supply.
- Manual carrier movement on conveyor rais
| General | Dimensions in mm | L-775 W-525 H-375 | | Weight | 20Kg | | Flux Bath & Air Knife | Flux Bath Capacity | 4.0 Ltrs | | Foam Width | 14" | | Foam Height | 10 mm | | Air Consumption | 40 cfm at 30psi | | Pre-Heater | Power Supply | 220 V AC, 50 Hz, 1.6 KW | | Standard Accessories | PCB Carrier | 1 No | | Utilities | Power Connection | 15 Amp Power Point | | Air Supply | Compressed Air with FR | |
Add to Enquiry Basket
|
Wire Stripping cum Twisting Machine We offer a range of wire stripping cum twisting machines that is used for stripping the insulation of round cables and twisting the stands of multi strand wires simultaneously. Procured from reputed vendors, these machines are high in performance and requires low maintenance. Further, we also make sure that these machines are in adherence with the relevant industrial norms.
Wire Stripping Cum Twisting Machine - Model AWZ 460
• For stripping the insulation of round cables and twisting the stands (of multi strand wires), simultaneously.
• Inserting the wire in the collet and withdrawing it completes the operation.
• Simple and fast change over from one wire diameter to another is done by changing the collet according to the wire diameter.
• Easy adjustments of stripping length.
• Nick free stripping as the tool does not touch the conductor.
• Special grade tool steel blade.
High quality motor, rated for continues & uninterrupted operation.
| Dimension (lxwxh) | 250x130x180mm | | Weight | 4.0 Kg | | Power | 220V AC, 50Hz, 50W | | Wire Diameter | 1.2mm to 3.5mm | | Stripping Length | 3.0mm to 25.0mm | | Collet Size available | From 1.4 to 6.0mm in steps of 0.1mm | | Standard Accessories | Collets : 4 no | | Spare Spring : 5 no | | Spare Tool Bit : 1 no | | Tool Kit | |
Add to Enquiry Basket
|
Automatic Wire Sizing Machine Avail from us an assortment of automatic wire sizing machines that find wide application in electronics & electrical industry. These machines are suitable for cut to length applications and can be used for round and flat cables sleeves, shrink tubing etc. Available in different specifications, these are appreciated for their efficient operations and low maintenance standards.
Automatic Wire Sizing Machine - Model AWS 540
• Suitable for cut to length applications.
• Ideal for round and flat cables sleeves, shrink tubing etc.
• Operational feed guides for flat cables.
• Wire fed through guides and feed rollers
• Length measurement through closed loop circuit with encoder feed back.
• Special grade tool steel cutting blades.
• Wire spool holder and de-reeler for drag free to the machine.
• Capability of feeding three wires at a time to increase output.
| Dimension(lxwxh) | 420x320x360 mm | | Weight | 24 Kg | | Power | 220V AC, 50Hz, 100W | | Wire Diameter | 1.0 mm to 3.5 mm | | Length Setting | Min 10mm Max 9999mm | | Time(T) for cutting length (L mm) | T=)L/132+1) Sec | | Output per hour for length L | 3600/T | | Cutting Tolerance | +/- 2.0 mm | |
Add to Enquiry Basket
|
Forming Machines Our wide range of Forming Machines for Axial & Radial Components is available in standard options. These are procured from leading manufacturers who fabricate these by using qualitative raw material that provides it with distinct features such as sturdy construction and high productivity rate. These are available in various models such as:
Manual Cut & Bend Machine for Axials Model MAP 860 / Automatic model UAP 850
Manual De-Taping Machine for Radials Model MAP 860 R / Automatic Model UAP 850 R
The model is widely acclaimed for its peak performance and durability. Some of its distinct features are:
• Suitable for Tape Components
• Strain Free Forming
• Optional Vertical Configuration attachment
Technical Specification
| Dimension (l x w x h) | 330 x 160 x 175 mm | | Weight | 10 kg | | Power | 220V AC, 50Hz, 100W |
Automatic Cut & Kink Machine For Radials Model ARP 750
The model has gained huge appreciation for its high operational efficiency and easy installation. Some of its features are:
• Suitable for loose Components
• Option of Cut & Kink OR plain Cut Operation
• Kink Depth adjustable to snap-in or stand-off
• Leg length adjustable
• Manual Component feeding and motorized forming
• Option of auto mode for 1 sec stroke cycle or jog mode for foot switch operation
Jumper Link Making Machine Model JMP 680
The high performing Jumper Link Making Machine Model JMP 680 is known for its sturdy construction and high scuff resistivity. Some of its distinct features are:
• Automatic operation
• Step-less adjustment of pitch
• Easy adjustment & maintenance
Universal Manual Preformer Model UMP 870
• Manual operation
• Versatile machine with variety of tooling options
• Suitable for loose axial and radial components.
• Easy adjustments.
• Hardened steel toolings
• Ideal for low to medium volume production |
Add to Enquiry Basket
|
Conveyor Systems And Low Cost Automation Products We procure wide array of conveyor systems and low cost automation products from reliable OEMs. Our traded conveyor systems comprises of flat belt conveyors, roller conveyors, free flow conveyors, slat conveyors / slat band conveyor system, slat conveyors and PCB conveyors. These conveyor systems are available in different designs and sizes that enable easy integration of conveyors in various production and process machinery. Our traded low cost automation products are used for indexing turn table application.
|
Add to Enquiry Basket
|
Showcase
View all our products / services as a slide show.
Play Now
 
|
© Sharang Corporation, All Rights Reserved. (Terms of Use)
